The advantages of outdoor high-power LED floodlights are mainly long use time and low failure rate. But the premise should be after a reasonable installation. In the face of complex wiring steps, how should LED floodlights be wired?

The spotlight has three lines, blue, brown and yellow-green. When wiring the led floodlights, connect the blue and brown lines to the live line and lead, respectively, regardless of polarity. Generally connected to the ground wire can lead the current to the bottom, which can play a certain protective role when the electrical equipment leaks or the voltage is too high. If there is a ground wire, it is better to connect it. If there is no ground wire, you need to do waterproof and leakage measures. Completing these is the first step in the safe wiring of the floodlights.

The power supply of led floodlights is high-voltage alternating current. When installing, please pay attention to the places that are easily accessible to the crowd, and do the grounding treatment of the lamps to avoid electric shock. The power of the flood light is large, and the installer should select the appropriate power line according to the power of the actual use of the lamp when wiring, and supply power by phase separation. The mounting position must be sufficient to withstand the weight of the floodlight, and the bearing capacity is preferably 10 or more by the weight of the floodlight to ensure that the fixture is securely installed.